A common misconception about underground fencing is that is needs to be buried "Underground". With this, a lot of people are having a dilemma in buying underground fences.

There is no need to spend a weekend burying the wire underground, or hiring someone to bury the boundary wire when it can be installed through underground fences above ground installation in only a matter of an hour or two. Here's an interesting product that can make things easier for owners.

Dog containment using the dog underground fences will never be a problem again. With the wire securing staples, the hardest thing to do before will be easy, swift and most of all dirt-free. All owners have to do is to lay the wire down and within 1 to 2 weeks, the root system of the lawn will grow over the wire and hide it completely from view, essentially "Burying" it into the lawn through underground fences above ground installation. is a perfect hassle free solution to installation difficulties.

Step 1:

» First lay out the boundary wire in the desired shape and around the area owners want to contain. From the boundary wire run twisted wire to the transmitter and pug it in.
» Once owners have decide the system owners chose is correct for owners, "Staple" the twisted wire to the ground by hammering in a wire "Staple" every 5 - 6 feet.
» Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? The wire MUST completely touch the ground. If not go and "Staple" any raised areas before proceeding to the next step.

Step 2:

» Place a "Staple" where the twisted wire and the beginning of the boundary meet (if owners have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a "Staple" in the front of and behind the splice to relieve any pressure on the splice)
» Next, walk to the first corner of the boundary and "Staple" it to the ground. Repeat this step for all corners of the boundary. (Not all yards are square if owners do not have corners on the boundary please select multiple anchor points for the wire)
» Now place staples as needed and make sure to staple any raised areas down until they are completely flush with the ground, for maximum safety for owners and the guests.